MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar

MAIN FEATURES
Working pressure - 10 bar (1,0 MPa)
Burst pressure - 40 bar (4,0 MPa)
Class A
Category N-T
Safety factor 4:1

Application
This reliable hose is widely used to supply compressed air to pneumatic tools. It is designed also for general use of  water and light chemicals in industry and agriculture.

It is characterized by a high safety factor 4:1.
This hose is resistant to abrasion, weathering, ozone and heat.

On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

Operating temperature
From -30°C to +80°C
Briefly to +100°C

On request we can supply hose for use in wider temperature range from -40°C and up to +100°C.

CONSTRUCTION
According to EN ISO 2398 (TYPE 1).

Inner tube
Black SBR synthetic rubber

Reinforcement
Interlayers made of textile cord or synthetic threads depending on diameter.

Cover
Abrasion, weather conditions and ozone resistant  black SBR/EPDM synthetic rubber.
Hoses up to DN 12,5 in diameter have smooth surface. Larger diameters have cloth impression.

Method of marking
Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a light blue tape.

1. Air & Water 10 bar