Water 6 bar

Produkt

Dostępność

Cena netto (brutto)

Ilość

  • Water 6 bar DN 8_5/16"

    W magazynie

    Wysyłka w 24h

    3,74 (4,60) zł

    > 0,00 (4,60) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 100_3.15/16"

    W magazynie

    Wysyłka w 24h

    82,06 (100,93) zł

    > 0,00 (100,93) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 10_3/8"

    W magazynie

    Wysyłka w 24h

    4,12 (5,07) zł

    > 0,00 (5,07) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 12,5_1/2"

    W magazynie

    Wysyłka w 24h

    4,95 (6,09) zł

    > 0,00 (6,09) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 14_9/16"

    W magazynie

    Wysyłka w 24h

    8,75 (10,76) zł

    > 0,00 (10,76) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 16_5/8"

    W magazynie

    Wysyłka w 24h

    8,84 (10,87) zł

    > 0,00 (10,87) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 18_23/32"

    W magazynie

    Wysyłka w 24h

    11,10 (13,65) zł

    > 0,00 (13,65) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 20_25/32"

    W magazynie

    Wysyłka w 24h

    11,54 (14,19) zł

    > 0,00 (14,19) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 25_1"

    W magazynie

    Wysyłka w 24h

    13,38 (16,46) zł

    > 0,00 (16,46) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 28_1.3/32"

    W magazynie

    Wysyłka w 24h

    15,08 (18,55) zł

    > 0,00 (18,55) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 31,5_1.15/64"

    W magazynie

    Wysyłka w 24h

    16,78 (20,64) zł

    > 0,00 (20,64) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 38_1.1/2"

    W magazynie

    Wysyłka w 24h

    26,25 (32,29) zł

    > 0,00 (32,29) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 40_1.9/16"

    W magazynie

    Wysyłka w 24h

    27,73 (34,11) zł

    > 0,00 (34,11) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 45_1.3/4"

    W magazynie

    Wysyłka w 24h

    29,06 (35,74) zł

    > 0,00 (35,74) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 50_2"

    W magazynie

    Wysyłka w 24h

    32,77 (40,31) zł

    > 0,00 (40,31) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 6,3_1/4"

    W magazynie

    Wysyłka w 24h

    3,26 (4,01) zł

    > 0,00 (4,01) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 63_2.1/2"

    W magazynie

    Wysyłka w 24h

    45,93 (56,49) zł

    > 0,00 (56,49) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 75_3"

    W magazynie

    Wysyłka w 24h

    53,03 (65,23) zł

    > 0,00 (65,23) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
  • Water 6 bar DN 80_3.5/32"

    W magazynie

    Wysyłka w 24h

    55,26 (67,97) zł

    > 0,00 (67,97) zł/

    MAIN FEATURES


    Working pressure - 6 bar (0,6 MPa)
    Burst pressure - 18 bar (1,8 MPa)
    Safety factor - 3:1

    APPLICATION

    This hose is designed for general use of water and light chemicals in industry and agriculture for irrigation and drainage systems. Also eagerly used for hot water cleaning of floors, walls and all kinds of equipment.

    It is resistant to abrasion, weathering, ozone and heat.

     The hose can be offered also in a version with higher resistance to abrasion for transferring the mixture of water with sand or other abrasive materials.

    On request, we provide additional spiral steel wrap for protection against excessive abrasion and deformation, such as kinking or crushing. This option applies to hoses with nominal diameters larger than DN 12.

    Operating temperature
    From -30°C to +80°C
    Briefly to +100°C

    CONSTRUCTION

    Hoses of nominal diameter up to 80 mm are made in accordance with EN ISO 1403 (type 1).
    Hoses of nominal diameter 100 mm are made according to Stomil’s design WT-37/13/BZPG.


    Inner tube
    SBR hot water resistant black synthetic rubber.

    Reinforcement
    Interlayers made of textile cord or synthetic threads.

    Cover
    Abrasion, weather conditions and ozone resistant black SBR synthetic rubber.
    Hoses up to DN 12,5 have smooth surface. Larger diameters have cloth impression.

    METHOD OF MARKING

    Diameters with smooth surface are marked with white print. Larger diameters with cloth impression are marked with a green tape.
    1. Water 6 bar
Dodaj do ulubionych